Ursuit® 5113 Dry Intermediate Suit
The Ursuit® 5113 is very lightweight dry suit to be worn under an outer garment. Thanks to the breathable Gore-Tex® fabric, the suit
will keep your underwear dry even when worn together with outer clothing that does not breath, for instance floating overall. The suit is
worn in situations where the outer garments have to be changed according to varying conditions.
will keep your underwear dry even when worn together with outer clothing that does not breath, for instance floating overall. The suit is
worn in situations where the outer garments have to be changed according to varying conditions.
 | Seam construction is double seams so that | |
| the seam will not open even when worn. Inside the seams are heat seal taped and reinforced to be 100% watertight | ||
| Socks are made of Gore-Tex® Gotland | |
| material | ||
| Dry zipper is a very light new type of dry zipper | |
| opening from the right hip to the left shoulder | ||
| Neck seal is patterned 2.5 mm super stretch | |
| neoprene. For easy dressing and undressing the rubber surface is on the outside | ||
| Wrist seals are 2.5 mm super stretch | |
| neoprene with nylon lining on both sides. Easy to put on and take off. The neoprene also keeps you warm in cold conditions |
Ursuit® X-Tex Finnfill Underwear
Patented Ursuit® thermal underwear gets even better when washed.
The outer layer is made of elastic and durable tricot fabric with slippery surface. This
improves the comfort of the complete dry suit concept.
Water tightness of the intermediate layer allows the use of the underwear and
donning of the dry suit in rain or wet conditions. Slows up the wetting of the
insulating layer and the weakening of the insulation properties, even if the dry suit
got damaged during the dive.
Breathing fabric allows vapor to get through, on and below the surface. Wearing the
suit above surface is dry and pleasant both before and after the dive. Humidity
created during the dive gets through the underwear and is concentrated on the inner
surface of the dry suit, keeping the skin and the insulation dry. The moisture on the
surface of the suit, caused by the difference in temperature, stays outside the
underwear.
The outer layer is made of elastic and durable tricot fabric with slippery surface. This
improves the comfort of the complete dry suit concept.
Water tightness of the intermediate layer allows the use of the underwear and
donning of the dry suit in rain or wet conditions. Slows up the wetting of the
insulating layer and the weakening of the insulation properties, even if the dry suit
got damaged during the dive.
Breathing fabric allows vapor to get through, on and below the surface. Wearing the
suit above surface is dry and pleasant both before and after the dive. Humidity
created during the dive gets through the underwear and is concentrated on the inner
surface of the dry suit, keeping the skin and the insulation dry. The moisture on the
surface of the suit, caused by the difference in temperature, stays outside the
underwear.
| Vent holes in the armpits and | |
| on the left arm assure the free circulation of air inside and outside of the underwear, and allow air control of the dry suit at any ascent speed. | ||
| Large hip pockets | |
| Chest pocket with zipper | |
| Retainers in the legs | |
| Thumb loops | |
| Elastic fabric in legs and cuffs | |
| Front zipper with double locks | |
|
| Home - Site Map - Terms & Privacy Statement Copyright © 2004-2007 Tallcoat® Corporation. All rights reserved. |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
The insulating Finnfill material does not loose any of its properties even when
washed frequently in water. The Clo (=unit for expressing the thermal insulation)
value is better than 2. The material does not lose its insulation capacity even after
being washed many times. Chemical wash improves the Clo by 10%. The Finnfill
insulating material does not break up like most cotton-wool insulating materials,
and therefore it does not either get lumpy or flattened during use or washing. The
material also keeps the main part of its insulation capacity when completely wet.
The inner lining is of a pleasant and light fleece fabric, which adds to the insulation
of the suit, without adding to its weight.
washed frequently in water. The Clo (=unit for expressing the thermal insulation)
value is better than 2. The material does not lose its insulation capacity even after
being washed many times. Chemical wash improves the Clo by 10%. The Finnfill
insulating material does not break up like most cotton-wool insulating materials,
and therefore it does not either get lumpy or flattened during use or washing. The
material also keeps the main part of its insulation capacity when completely wet.
The inner lining is of a pleasant and light fleece fabric, which adds to the insulation
of the suit, without adding to its weight.
Customer Service • Toll-free (888) 791-7212 • Mon - Fri. 9 am - 5 pm Eastern
|
 |
